不能正常開機

首先講講部機之前搞過乜:
部機之前小弟係搵人超過頻,諗住由P4 2.6c上到2.8...但唔知點解失敗,
跟住部機仲出現死機既情況,話cantact唔到到個hard disc,
之後落番做2.6c,部腦就話overclocking error 之類既字句,
過左幾日都冇事.....
而家既situatuion:
尋晚換ram,張原本條kingston 256mb ddr 400 既 ram 換左做2條256mb ddr333 既ram
知後又唔知點解又出overclocking error 之類既字句,
之後我試下關機,都ok 順利關到,
但當小弟"禁" button 開機o個時......開唔到= =....
之後熄左佢再開就開到,但又彈overclocking error 之類既字句.....

點解會咁既呢??請各版友幫忙,THX!!

底版:ASUS 既P4P8X

[ Last edited by marioso on 2005-9-11 at 12:02 ]

Have u tried "Clear CMOS" ?
Pls try that first..

excuse me....how can i do it??

[ref=366456]marioso[/ref]  在 2005-9-11 22:45 發表:

excuse me....how can i do it??

You may refer to this:
http://usa.asus.com/products/mb/cpr.htm