CMB 1:24 DMS

呢架 DMS, 好似真車一樣, 不過唔知幾錢????
http://www.gwmailbox.freeserve.co.uk/news.htm

[ Last edited by Ailsa_volvo on 2005-8-20 at 19:58 ]

[ref=342421]Ailsa_volvo[/ref]  在 2005-8-18 10:45 發表:

呢架 DMS, 好似真車一樣, 不過唔知幾錢????
http://www.gwmailbox.freeserve.co.uk/news.htm

鄰板話 $1388，上次 1:24 AEC Routemaster 都係賣 $1388；

做得精緻，可以開窗、開門，內籠又靚，最正係有搞牌功能！

唔知點樣攪牌呢?

架車真係好正!
多年來夢想就係有架可以開窗開門既大比例模型,
依家仲有埋搞牌!
如果有足夠銀兩一定買返架。

: 係非常吸引喎!!!

不過小弟對它的比例好懷疑:
Scale: 1:24 (Length 40 cm - Width 11 cm ...)
呢個闊度同長度, 好似百貨公司賣的 Mxxxxo 1:24 私家車模型咁上下咋喎.....

還有, 車頭佈置好似不太 match.... 即係中巴把牌箱改了做 "倒T" 型的同時, 擋風玻璃應該都換了兩塊平坦的+雞翼窗仔 (FC1 除外); 如果擋風玻璃是沿用原裝英國彎玻璃, 咁牌箱都應該是還是原裝倫敦的三格 (中巴用上面兩格).

我估計它會標價 $1,500 或以上.....;)

[ Last edited by DD2113 on 2005-8-18 at 17:32 ]

But it is only 4.09kgs Weight??? Is it a metal or plastic?

If it releases KMB livery, I have a big interest to buy it.

Or if it is KMB's ME, then I MUST buy it.

http://www.80mbusmodel.com/menu-2k.html
巴模展有得睇

好貴,但物有所值ge
另問,架dms用乜野物料整ga

[ref=343000]HD3005[/ref]  在 2005-8-18 08:54 PM 發表:

好貴,但物有所值ge
另問,架dms用乜野物料整ga

外殼係金屬, 內部係膠
巴模展將成部車的組件show晒出黎

[ Last edited by Ailsa_volvo on 2005-8-18 at 21:04 ]

我今日去巴模展睇過, 架車真係好正, 但真係有點大...我諗買左都冇位放!
小小覺現： 車上3 個路線牌都可以攪. 樓上尾座有個小齒輪控制尾牌，但唔知頭牌／側牌點攪．．．