KMB Scania K95

原帖由 volvo3asv 於 2006-9-25 21:47 發表

PS: 唔知下車門係唔係外推式呢 .. 個開門掣好近道門 ...

由內籠睇唔似係外推式...

原帖由 LA16-3ASV465-51 於 2006-9-25 23:48 發表

由內籠睇唔似係外推式...

同 APM1 一樣係向外推然後打橫趟開

其實架車都幾有型丫~
不過呢......佢條樓梯入面加左兩塊軟墊，
會唔會更加鼓勵乘客們企樓梯呢？

我入去睇過0的gallery都見到呢樣0野，0甘都比你
諗到，不過又真係用得著0窩．．．

有無人知呢個身叫乜名？係問個車身叫乜名，唔
係個車身廠叫乜名．．．

原帖由 KR4210 於 2006-9-25 23:56 發表

同 APM1 一樣係向外推然後打橫趟開

即係AVBW1 o個款?

原帖由 ukbusman 於 2006-9-25 18:55 發表
Photos of the K95 + Other ex-HK machines
http://1.fpic.co.uk/c1093137.html

norrislaw taking photographs XD http://1.fpic.co.uk/p34427723.html

Oh my goodness, what a good shot u took

當年Berkhof車身既MAN出黎...大家都一致覺得似一副棺材,金棺,四四方方...
而家睇慣左又覺得幾MAN幾型,線條幾靚

with this height, it might not pass the HK test from TD ga wor, what happen if it didn't pass the requirement?

Ship it back.?

原帖由 norrislaw 於 2006-9-25 18:05 發表


Yes I am 5"8 and when I sat at the back of the lower deck, I found that the design is much worse than Wright and even less headroom than a Toyota coaster

原帖由 s3n354 於 2006-9-26 00:06 發表
當年Berkhof車身既MAN出黎...大家都一致覺得似一副棺材,金棺,四四方方...
而家睇慣左又覺得幾MAN幾型,線條幾靚

咪就係囉﹐初初AVW出o個陣時我覺得勁核突﹐我第1次見到呢架scania既相同我o個陣時第1眼見到AVW 1樣﹐覺得幾反感﹐但係睇慣睇熟﹐覺得AVW又既靚wor

原帖由 art0925 於 2006-9-26 00:14 發表
with this height, it might not pass the HK test from TD ga wor, what happen if it didn't pass the requirement?

Ship it back.?

No one saying the bus will not pass the TD test and obviously no one know if it doesn't pass the requirement

我覺得部車好cool!好似身在十多年後的世界。